(479) 358-1173Customer apps
One MotionRequest a quote

Products

CorTexGUS

Resources

Blog

Support

Request a quoteTalk to an engineer(479) 358-1173

Marketing literature.

Our sales presentation, plus brochures, white papers and case studies to share with your team. PDFs open in a new tab.

  1. One Motion, Direct Drive Rotary Motion (DDRM): a wheel of its four strengths, reliability, efficiency, performance and hygienic design, beside a conveyor system.
  2. Our technology, Direct Drive Rotary Motion: a permanent-magnet outer-runner drive with no gearbox, no oil and no gear train. About 20,000 units shipped since 2014, IP69K native washdown sealing. Shown with a video of the magnet array.
  3. Reliability, five years where motors last one: field data from the largest poultry producer, 42 production plants, 990 DDRM units in service, 5 years average service life, 1,825 washdown cycles survived, backed by a 3-year warranty.
  4. Efficiency, efficient motor and right-sized system: an IE5 ultra-premium motor, sized to the load the belt actually needs, with a chart of units produced and carbon savings. Shown with a video of a spiral conveyor.
  5. Performance, three motions in one drive: continuous, start/stop and servo, with sensorless servo control holding position to ±3 arc-minutes. Shown in two videos.
  6. Hygienic, food safety by design: IP69K certified, 3-A Sanitary compliant, USDA compliant and EHEDG aligned, with a through-shaft powered pulley and a comparison with drum motors and AC gearmotors. Shown with a video.
  7. Three ways to buy One Motion DDRM: SideDrive, a standard motor and gearbox replacement in stock; PulleyDrive, a standard drum motor replacement; and MagDrive, custom and process-specific.
  8. How to compare DDRM with today's motor and gearbox: how Watt measured a horse, newton-meters and foot-pounds, and sizing by output torque instead of input horsepower, comparing a 1 HP motor and 30:1 gearbox with SideDrive.
  9. SideDrive, one part number replaces any 1 HP gearmotor up to 30:1: 1 HP, ½ HP and shafted versions on a 1.25-inch hollow bore with a NEMA 56C face mount, 40 Nm continuous, 120 Nm peak, 0–300 rpm, IP69K. Shown in three videos.
  10. PulleyDrive, the gearless drum motor replacement: six diameters from 58 to 215 mm, face widths from 255 to 610 mm, built for common belt brands, ships in under 10 days. Shown with a video.
  11. MagDrive, the cornerstone of everything we build: custom designed powered hubs, Multi-Drives, powered pulleys and powered shafts, the core of SideDrive and PulleyDrive.
  12. Multi-Drive application, an independent four-belt system: four belts on one shaft with no gearboxes, compared with a conventional system that needs a motor and gearbox on every belt. Shown in two videos.
  13. Product merge application, Multi-Drive with powered side belts: 2-to-1 merges in production, bagged product 100 to 200 ppm, frozen dough 90 to 180 ppm, flow wrapped 150 to 300 ppm. Shown in four videos.
  14. Infeed systems application, DDRM for OEM infeed systems: 20 years of infeed and flow wrapping know-how, with programming support at no added cost. You tell us, we recommend, we design and program, you build and run, with photo-eyes timing each powered hub. Shown in three videos: singulation, stacking and grouping.
  15. Powered assemblies application, powered hubs on one structure: 27 × 2 to 54 lanes and a 14-to-2 lane merge, one hub per lane with independent motion. Shown in two videos.
  16. Multi-Drive application, smart lane control: three lanes and four Multi-Drives timing product into one pack, with skew correction. Shown in three videos.
  17. Project CorTex, motion you can measure: how CorTex connects One Motion drive feedback to live data on a closed local network, with no internet or plant IT network needed. Shown with a video.
  18. DDRM Robot, a hygienic direct-drive robot for food and packaging: no gears and no backlash, 120 Nm peak torque per arm, 200 picks per minute, 60 lb peak load, IP69K 316 stainless. Shown with a video.
  19. GUS, Physical AI: DDRM listens, CorTex detects and GUS guides, a guided user support assistant for sizing, VFD setup and troubleshooting, grounded in One Motion data.
  20. MagDrive application, robotic sandwich assembly: four smart belts and 16 belts aligning buns for a robot cell, with no servo drives and every belt on a standard VFD. Shown in two videos.
  21. MagDrive application, robotic pick assist: a smart belt feeder that retimes products into precise patterns for the robot, up to 8 products per minute, powered by VFDs. Shown in two videos.
  22. Private label OEM partner, Dorner AquaPruf iDrive2: Dorner private labels One Motion direct drive as the iDrive2 on its AquaPruf sanitary conveyor line. Shown with a video.
  23. Customers, where One Motion runs today: 177 active accounts, 104 production end users, 58 OEMs and 15 support sites, on a map of the U.S. with Canada, Europe and Australia.
  24. Case study, the test that changed how we go to market: at the Humboldt processing facility, One Motion drives cut total-system power 43%, from 576 W to 326 W, leading to an order for 400+ drives for a new plant.
  25. Explore One Motion online: links and QR codes for onemotion.tech, SideDrive, MagDrive, PulleyDrive, the Direct Drive Robot and CorTex, with Actionpaq's address in Rogers, Arkansas and phone (479) 358-1173.

1 of 25

Sales presentation

Our story, the technology and drives on real lines, in 25 slides. Videos play as you reach them.

Download the slides as a PDF (opens in a new tab) (4 MB; videos show as stills)

Also on this page

Brochures and papers.

See it running

Product films and real lines merging, grouping and feeding product. Watch the videos

Specs and setup

Dimensions, wiring, setup guides and warranty documents are in support documentation.

Need it for a specific line?

Tell us about your application. Our engineers will help you find the right motion, whether it’s a drop-in drive or a custom design.

Request a quoteTalk to an engineer

Prefer to talk now? Call (479) 358-1173